FSP450-80EVMR 2 x 450 watt FSP maximum continuous total DC output power should net exceed 450W. Maximum continuous combined load on +3.3V and +5V outputs shall not exceed 100W. Mazimum combined current for the 12V outputs shall be 24A. When peak load of +5Vsb is 2.5A, the main power should be turn on.
Input Spec:
Input Voltage : 90-264vAC
Input Frequency: 47-65 Hz
Output Spec:
Ripple and Noise: +3.3v, +5v, +5VSB: 50mV p-p, +12v : 120mV p-p, -5v, -12v: 200mV p-p
Hold up time: 16mS
OVP; +3.3v : 3.9v - 4.5v, +5v : 5.7v - 6.5v, +12v : 13.3v - 14.5v
OTP: Primary and Secondary Protection with auto recovery
OCP : +3.3v, +5v : 110 - 150%, +12v1, 2, 3 : Peak current minimum; 20.5A maximum
Remote On/Off: On = PSON: 0V - 1.0V, Off = PSON : 2.0V - 5.25V
Current share ; 2 supplies to share within +/- 5%
I2C-Bus EEPROM
MTBF : 100KHrs per Bellcore SR-332 at 25C
Efficiency ; Min 80% at Full Load
OPP Temp : 0-50C
Safety Approvals: CB, CE, FCC, TUV, cUL
Connectors: 1 x 20+4 way, 1 x 12VP4, 1 x EPS 8 Pin, 4 x SATA, 5 x Molex, 1 x Floppy
Outputs:
+3.3vDC 0.5 - 20A
+5vDC 0.5 - 20A
+12V1 0.5 - 18A
+12V2 0.5 - 18A
+12V3 0.5 - 14A
-5vDC 0 - 0.5A
-12vDC 0 - 0.8A
+5VSB 0 - 2A
Size: 190mmL x 150mmW x 84mmH |
