Emacs Zippy R2G-5420V4V Redundant 420 watt Power Supply
Features :
* TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃,STORAGE -20℃ ~ 80℃
* HOLD UP TIME: WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 16 ms IN
REGULATION LIMIT AT NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
* INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE
* EFFICIENCY: >80% TYPICAL AT 115V, FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110%~180%
* OVER VOLTAGE PROTECTION: +5V→5.9~6.7V, +3.3V→3.9~4.3V, +12V→13~15V
* OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→27.5~37.5A, +12V→36.3~52.8A
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, AUTO-RECOVERED: +5VSB
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* LEAKAGE CURRENT: 3.5MA MAX. AT NOMINAL VOLTAGE 250VAC
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
| Output Voltage |
Output Current Min. |
Output Current Max. |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
| +5V |
0.5 |
25 |
±5% |
±1% |
50mV |
| +12V |
2.0 |
33 |
±5% |
±1% |
120mV |
| -12V |
0.2 |
0.8 |
±10% |
±1% |
120mV |
| +3.3V |
0.5 |
25 |
±5% |
±1% |
50mV |
| +5VSB |
0.1 |
3.5 |
±5% |
±1% |
50mV |
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
+5V AND +3.3V TOTAL OUTPUT MAX : 170W
TOTAL OUTPUT MAX: 420W
Dimension:
276 x 101 x 82(mm)
10.87 x 3.98 x 3.23(inch) |
