|
Part is now DISCONTINUED. See replacement part to order HERE FSP180-50LE PC Switching Power Supply from FSP Group. 180 Watts Flex ATX 12V for PENTIUM 4 . Replaces FSP180-50PLA. High efficiency and reliability. PC Switching Power Supply 180 W Flex ATX 12V for PENTIUM 4. High efficiency and reliability. Remote On/Off function. Internal 12V DC ball bearing fan included. Replaces ACE-A618A . Potential replacement for FSP200-50PLA, FSP220-50LC . Connectors: 1 x 20 way, 2 x 4 way HD, 1 x 12vP4, 1 x Sata, 1 x 4 way FD
INPUT CHARACTERISTICS |
Input Range: | 90-265V AC, Full Range Input |
Frequency: | 47Hz - 63Hz |
Input Current: | 4A RMS @ 115V AC, 2A RMS @ 230V AC |
Inrush Current: | 50A Max. for 115V AC, 80A Max. for 230 V AC Cold start |
|
Dimension: | 150 x 81.5 x 40.3 mm |
Application: | For Industry Use |
Watt: | 180 |
Features |
High efficiency | 100% burn-in under high ambient temperature(50°C) |
Low Ripple & Noise | 100% Hi-pot tested |
Complies with EN61000-3-2 | AC input full range |
INPUT SPECIFICATIONS |
Input voltage: | 90 to 264 VAC |
Input frequency: | 47 to 63 Hz |
PROTECTIONS |
Over voltage protection: | +3.3V: 3.7V - 4.5V
+5V: 5.7V - 6.5V
+12V: 13.3V - 15.6V |
Short circuit protection: | It is defined to be a short circuit load of less than 0.1 ohm |
GENERAL SPECIFICATIONS |
Hold-up time: | >17ms |
Efficiency: | >68 % at full load |
Voltage: | 1500VAC from input to output |
MTBF: | 100,000 hours at full load at 25°C |
ENVIRONMENTAL SPECIFICATIONS |
Operating temperature: | 0°C to +50°C |
Storage temperature: | -20°C to +80°C |
Relative humidity: | 95% non-condensing |
|
