| Manufacturer: |
FSP Group |
| SKU: |
FSP250-701UJ |
| Availability: |
|
 E-mail this product to a friend
|
|
| |
SEE DP-1U25 in stock on this website for replacement. FSP250-701UJ power supply without a Mains Switch is a replacement for FSP250-50PLB(1U) but it also includes a -5vDC output. As the FSP250-50PLB(1U) is not fitted with a -5vDC output you are recommended to remove the white wire (-5vdc) from the 20 way connector. As used on Dedicated Micros BX2 4U DVR and Multiplexer BX2P DX16C / BX2P DX16D. This may replace Potrans PC20026010, Emacs P1A-6200P, V1E-5250V and ACE-A225A but please check.
INPUT SPECIFICATIONS
Input Range: 100-240VAC
Frequency: 50Hz - 60Hz
Input Current: 4A RMS @ 100VAC, 2A RMS @ 240VAC
Inrush Current: 50A Max. for 115VAC, 100A Max. for 230 VAC
GENERAL SPECIFICATIONS
Temperature Range: Operating -5°C to +50°C, Storage -20°C to +80°C
MTBF: 100K Hours
Hold up Time: 17mS minimum at full load & nominal input voltage
Efficiency: 85% at full load
Short Circuit Protection: +3.3v, +5v, +12v Shutdown and latch off
Overvoltage Protection: +3.3v: 3.5V -4.8V; +5v: 5.5v- 7v; +12V1 / +12V2: 13.4 - 16v
Dimensions: 190(L) x 100(W) x 40(H) mm
FEATURES
High efficiency 85%
Active PFC circuit
Power factor correction (PFC)>0.95@100VAC
Internal 12 VDC fan included
Low noise and ripple
Output over voltage protection
Short circuit protection
MTBF 100.000 hrs. at 25°C
100% Hi-pot & ATE tested
100% burn-in under high ambient temp. (50°C)
Approved by CB, cUL, CE, FCC, CCC, TUV, ErP, Meet 80 plus (Bronze)
OUTPUT SPECIFICATIONS
Output Voltage +3.3V/Minimum 0.3A/Maximum 14A
Output Voltage +5V/Minimum 0.3A/Maximum 16A
Output Voltage -5V Minimum 0A / Maximum 0.3A
Output Voltage +12V1 Minimum 0.5A/Maximum 16A
Output Voltage +12V2 Minimum 0.5A/Maximum 16A
Output Voltage -12V/Minimum 0A/Maximum 0.5A
Output Voltage +5Vsb/Minimum 0A/Maximum 3A
Output Cables: 20 +4 Pin, 4-Pin 12V, 4 x HDD, 2 x SATA, 1 x FDD
|
|
|
NB: Images are indicative only |
SEE DP-1U25 in stock on this website for replacement.
1. PC Power Supply 250 watt FSP250-701UJ without Mains Switch.
2. ATX Industrial Power Supply with PFC.
3. Replacement for FSP250-50PLB(1U)
4. FSP250-50PLB(1U) is used on Dedicated Micros BX2 4U DVR and Multiplexer BX2P DX16C / BX2P DX16D
5. This may replace Potrans PC20026010, Emacs P1A-6200P, V1E-5250V and ACE-A225A but please check. |
|
|
| 1.70 |
| Standard Manufacturer |
|
