| Manufacturer: |
FSP Group |
| SKU: |
H-000467 |
| Availability: |
|
 E-mail this product to a friend
|
|
|
|
REPLACEMENT PART FSP250-50LC . Please go to this item on our webshop and order it there.
FSP250-50PLB PC power supply.
Complies with Flex ATX and ATX12V standard
Active Power Factor Correction Meeting with EN61000-3-2
High efficiency and reliability
Remote On/Off function
Internal 12V DC fan included Noise Killer (Thermal fan speed control function)
Low noise and ripple
Complies with FCC part 15 subpart J Class B and CISPR 22 Clas B
Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down Op Temp.
Ranges 0 to +25 deg.C on 250 watt O/P load or 0 to +50 deg.C on 220 Watt O/P load.
Approved by UL 1950, CSA C22.2 No.234 Level 3, TUV EN60950, NEMKO (CB Report), CE
Connectors: 1 x 20 way, 3 x 4 way HD, 1 x 4 way FD, 1 x 12vP4
Power supply for Dedicated Micros Digital Sprite 2 CCTV Recorder
| Input Range: |
90-265V AC, Full Range Input |
| Frequency: |
47Hz - 63Hz |
| Input Current: |
5A RMS @ 115V AC, 3A RMS @ 230V AC |
| Inrush Current: |
50A Max. for 115V AC, 80A Max. for 230 V AC Cold start |
| Efficiency: |
68% minimum measured at nominal AC input. and maximum load on all outputs |
| Rise Time: |
Less than 20ms. |
| Hold up time: |
17ms minimum at nominal input voltage |
| Power Good signal: |
Power on delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible |
| MTBF: |
100K hours at maximum load at +25*C |
| Dimensions: (W x H x L) |
81.5 x 40.5 x 190mm / 3.2 x 1.6 x 7.5 inches |
OUTPUT SPECIFICATIONS
-
Output Voltage +3.3V/Minimum 0.3A/Maximum 18A
-
Output Voltage +5V/Minimum 0.3A/Maximum 20.0A
-
Output Voltage +12V/Minimum 1.5A/Maximum 16.0A
-
Output Voltage -12V/Minimum 0A/Maximum 0.5A
-
Output Voltage +5Vsb/Minimum 0A/Maximum 2.0A
-
+5v and +3.3vDC total output not to exceed 115 Watts
-
+3.3v, +5v and +12v total output cannot exceed 236.4 watts
FSP Group PC Switching Power Supply 250 W Flex ATX 12V for PENTIUM 4. High efficiency and reliability. Remote On/Off function. Internal 12V DC fan included. Noise Killer (Thermal fan speed control function).
| Output Voltage |
Output Current |
Regulation |
Output Ripple & Noise Max (P-P) |
| Min (A) |
Max (A) |
Load |
Line |
| +3.3V |
0.3 |
18 |
±5% |
±1% |
50mV |
| +5V |
0.3 |
20 |
±5% |
±1% |
50mV |
| +12V |
1.5 |
16 |
±5% |
±1% |
120mV |
| -12V |
0 |
0.5 |
±10% |
±1% |
120mV |
| +5VSB |
0 |
2 |
±5% |
±1% |
50mV | |
|
|
NB: Images are indicative only |
1. FSP Group PC Switching Power Supply
2. 250w Flex ATX 12V for PENTIUM 4 , FSP250-50PLB, FSP20050PLB.
3. High efficiency and reliability. Remote On/Off function.
4. Internal 12V DC fan included.
5. Noise Killer (Thermal fan speed control function)
6. FSP250-50PLB NO LONGER AVAILABLE TO ORDER. REPLACEMENT PART FSP250-50LC. Please go to this item on our webshop and order it there.
|
|
|
| 1.80 |
| Standard Manufacturer |
|
