Fan ''Noise-Killer'' circuitry
High efficiency. Low ripple & Noise. Output over voltage, short circuit and over current protected. Complies with SFX and SFX12V standard. Noise Killer (Thermal fan speed control function). 100% Hi Pot, ATE and burn in tested. Remote On / Off function. Passive Power Factor Correction. Complies with FCC part 15 subpart J Class B and CISPR 22 Class B. Re-settable power shutdown. Approved by UL, CSA, TUV and Nemko. This will also replace model FSP200-50SNV.
AC Input: 230vAC
| Temperature Range: |
0*C to +25*C on full load, storage and shipping -20*C to +65*C |
| Humidity: |
90% on operating and 95% on storage |
| Dielectric Withstand: |
Input to frame ground 1800V AC for 1 second |
| Efficiency: |
65% Rise |
| Time: |
Less than 20ms on all outputs Hold Up |
| Time: |
16.6ms minimum at 115vAC / 60Hz. 20ms minimum at 230vAC / 50Hz input voltage |
| Power Good Signal: |
Power On delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible) |
| Leakage Current: |
Not exceeding 3.5mA |
| MTBF: |
100,000 hours at maximum load at +25*C |
| Dimension: |
100 (L) x 125 (W) x 63 (H) mm |
| Output: |
+5Vsb/Min. load 0.1A/Max. load 2.0A |
| -12V/Min. load 0.0A/Max. load 0.5A |
| +12V/Min. load 2A/Max. load 10A |
| +5V/Min. load 1A/Max. load 16A |
| +3.3V/Min. load 0.5A/Max. load 16.7A |
