300x100x127(mm)
Dimension:
11.81x3.93x5(inch)
Input Specs:
VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE)
FREQUENCY: 47Hz ~ 63Hz
INPUT CURRENT: 10A/5A AY ANY LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 140/160A @ 110/220VAC (25℃)
POWER FACTOR CORRECTION: 95% @ 230V, FULL LOAD
Output Specs:
| Output Voltage |
Output Current Min. |
Output Current Max. |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
| +5V1 |
3.0 |
25 |
± 5% |
± 50mV |
80mV |
| +5V2 |
2.5 |
35 |
± 5% |
± 50mV |
80mV |
| +12V1 |
2.0 |
28 |
± 5% |
± 50mV |
120mV |
| +12V2 |
2.0 |
42 |
± 5% |
± 50mV |
120mV |
| -5V |
0 |
0.8 |
± 5% |
± 50mV |
100mV |
| -12V |
0 |
1.0 |
± 5% |
± 50mV |
100mV |
| +3.3V1 |
0 |
20 |
± 5% |
± 50mV |
80mV |
| +3.3V2 |
1.0 |
30 |
± 5% |
± 50mV |
80mV |
| +5VSB |
0.1 |
2 |
± 5% |
± 50mV |
80mV |
Features :
‧TEMPERATURE RANGE: OPERATING: 0℃ --- 40℃ STORAGE: -20℃ --- 80℃
‧HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
‧REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
‧HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
‧DIELECTRIC WITHSTAND: INPUT / OUTPUT 1800 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
‧ EFFICIENCY: 70% TYPICAL AT 115VAC FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110% ~ 150%
‧OVEROVER VOLTAGE PROTECTION: If an over voltage fault occurs,
the power supply will latch all DC output into a shutdown state.
|
|
Min |
Typical |
Max |
|
+3.3V1 |
3.7V |
4.1V |
4.3V |
|
+3.3V2 |
3.7V |
4.1V |
4.3V |
|
+5V1 |
5.7V |
6.1V |
6.5V |
|
+5V2 |
5.7V |
6.1V |
6.5V |
|
+12V1 |
13.6V |
14.3V |
15V |
|
+12V2 |
13.6V |
14.3V |
15V |
OVER CURRENT PROTECTION: If an over current fault occurs，the power supply will latch all DC output into a shutdown state.
|
|
Min |
Typical |
Max |
|
+3.3V2 |
33A |
39A |
45A |
|
+5V2 |
38.5A |
45.5A |
52.5A |
|
+12V2 |
46.2A |
54.6A |
63A |
