CPS-2511-1A1 Compuware Flex 250 watt.
Features:
High Power Density 8 W/cu-in3.
Active Power Factor Correction (APFC).
PF > 0.95. RoHS compliant for all six substances.
Application for Server, Storage, Networking, IPC.
Specifications
 |
Total Max Power：250 W |
|
Input Voltage：90 V to 264 V |
|
Outputs：Multi-output |
|
Dimension (D x W x H)：150 x 81 x 40 mm |
| |
| GENERAL SPECIFICATIONS |
| Hold-up time |
16ms @ 75% Load |
| Efficiency |
over 80% @ all Load |
| MTBF |
100,000 hours at 100% load and 50 degree C |
| Power good signal |
on delay 100 ms to 500 ms
off delay 1 ms |
| ENVIRONMENTAL SPECIFICATIONS |
| Temperature |
0 to 50 degree C Operating |
| Altitude |
10,000 feet Operating |
| Relative humidity |
0% to 85% RH Operating |
| INPUT SPECIFICATIONS |
| Input voltage |
90 - 264 V |
| Input frequency |
47 - 63 Hz |
| Input current |
3.5 - 1.5 A |
| OUTPUT SPECIFICATIONS |
| Voltage |
Regulation |
Max Load |
Ripple & Noise |
| +3.3V |
± 5% |
13A |
50mV |
| +5V |
± 5% |
14A |
50mV |
| +12V1 |
± 5% |
18A |
120mV |
| +12V2 |
± 5% |
18A |
120mV |
| -12V |
± 10% |
0.3A |
120mV |
| +5Vsb |
± 5% |
2A |
50mV |
Note：
1. Maximum continuous total DC output power should not exceed 250W
2. Maximum combined continuous power of 5V and 3.3V should not exceed 80W |
Cables: 1 x 20+4 pins---30cm (This is split)
· 1 x 4pins P4-----30cm
· Molex 4 pin(30cm)+molex 4 pin(15cm)+small 4 pins floppy (15 cm)
· SATA (30cm)+SATA(15cm)
· Molex 4 pin(30cm)+SATA(15cm) |
