DynaPower TC-1U25P80 1U Type 250 watt .

 

Features:

 

Dimension : 190 mm x100 mm x40 mm
> Application : For IPC
> ATX 12V / EPS 12V
> Watt : 250
> PFC : Active
> Voltage : 90 to 264 VAC
> Frequency : 47Hz to 63Hz
> Input Current : 115Vac / 6.3A max. 230Vac / 3A max.
> Inrush Current : No damage shall occur to the power supply and the fuse shall not open or exceed its maximum rating: 100A max @ 230Vac 25˚C cold start.
> Remote ON/OFF Control : TTL High/PS-OFF; TTL Low/PS-ON
   VIL=0.8Vmax, IIL=-1.6mAmax @Vin=0.4V
   VIH=2.0Vmin @Iin=-200uA, VIH=5.25Vmax @open ckt
> Operating Temperature : 0˚C to +50˚C
> Storage Temperature : -20˚C to +60˚C
> OPERATING HUMIDITY 10% to 90%,non-condensing at 40˚C
> STORAGE HUMIDITY 5% to 95%, non-condensing at 50˚C
> Hold-up Time : 16 msec (minimum) at 80% of full load at 115Vac input.
> Power Efficiency :80% (min.) at 20%,50%,100% loading line input
> MTBF: 100kHrs Minimum.

 

Specifications:

 

Output over voltage protection
> Short circuit protection on all output
> 100% burn-in under high ambient temperature
> The Power Supply shall withstand the following ESD conditions at any point on the Power Supply
> 100% Hi-pot tested
> Line input fuse protection
> With 4cm fan

 

DC Output:

Output Voltage	Min. load	Max. load	Load Reg.	Ripple & Noise
+5Vsb	0.0A	2.5A	±5%	50mV P-P
-12V	0.0A	0.8A	±10%	120mV P-P
+12V1	1A	16.0A	±4%	120mV P-P
+12V2	0.5A	16.0A	±4%	120mV P-P
+5V	0.5A	16.0A	±4%	50mV P-P
+3.3V	1A	16.0A	±4%	50mV P-P

Note:
• The combined power of +12V1 and +12V2 is 240W max.It is 20A max.
• +3.3V &+5V total output not exceed 100W
• The continuous total output power is 250W max.

Output Connectors:

 

DynaPower TC-1U25P80 1U Type 250 watt